Tips and Tricks: Vapor Genie
Before using the Vapor Genie always make sure that the lighter's flame length is about 1 inch, anything longer may touch the ceramic at the bottom of the top bowl piece and anything shorter you will not be able to achieve vaporization properly.
During Heat Up:
- While you are holding the flame to the bowl you want to slowly pull, this passes the hot air from the lighter through the herb chamber which vaporizes the material.
- The most important thing while using the Vapor Genie is to really pay attention and make sure the flame never goes too deep into the top bowl. If you do burn the ceramic at the bottom the Vapor Genie will become useless. So really pay attention to that.
- With most vapes you use solvents or cleaners to clean but with the Vapor Genie you want to be sure to avoid using any of these materials. The Vapor Genie is cleaned by simply running a pipe cleaner through it. You can also run some hot water through it as well.
- Not so much a technique, but some very important advice is to use an electronic lighter (included free when you order the Vapor Genie only from EZVapes.com) and not a flint lighter. When using a flint lighter some of the flint can accidentally flick into the top bowl and that is something you want to avoid.