The Titan 2 Hebe is portable style variable temperature vaporizer that is intended for use with dried blends. If stealth and convenience is what you're looking for then look no further this is the vaporizer for you.
At just over five inches tall and just under an inch thick the Titan 2 Hebe nearly fits into the pen vaporizer category. This device sits comfortably in the hand while vaping and fits perfectly in a pocket or purse while traveling for maximum discretion and portability..
The Titan 2 features an all stainless steel heating chamber that was constructed to vaporize dry blends quickly and evenly, creating a thick vapor with absolutely no combustion. The advanced blend chamber heats in just about a minute allowing you to take quick and stealthy sessions. This vaporizer has a variable temperature control system that ranges from 200°F-428°F (93°C-220°C). The temp settings can be adjusted in one degree increments using the up and down arrows found on the front of the vape, giving you much more precision when in comes to dialing in on what heat level works best with the material you are using. Once you find that perfect temperature leave the device at that level and the next time you activate the heating element the Titan 2 will automatically heat to that temperature. Toggle between Fahrenheit and Celsius by simultaneously holding down the power button with either the up or down button.
A 2200mAh lithium ion battery provides long vape sessions and can still be used while charging, keeping your Titan 2 vaporizer ready to go whenever you are. When the device's battery is fully depleted the LCD display will blink five times, when this happens connect the included micro-usb cable to begin charging. Once connected the LCD screen will then light up, leave connected until the battery is fully charged which will be indicated by the LCD light powering off. In order to extend the batteries overall life span it is recommended that you give your new Titan 2 vaporizer a full charge prior to it's first use.
To begin using the Titan 2 Hebe you first want to load the heating chamber by popping off the mouthpiece on the top of the device. After the chamber is revealed pack your finely ground blend without packing too tightly as this will decrease airflow. Once the device is packed up turn it on by pressing the power button five times in quick succession then set the temperature to the preferred level by using the up and down arrow buttons. After the temperature has been set hold the power button down for approixmately three seconds, this will activate the heating element. Once the desired temperature is reached the vaporizer you can begin taking slow, steady puffs. After your material is fully vaporized press the power button three times to deactivate the heating element and then another five times to power off the device.
The Titan 2 Hebe vaporizer is the cost-friendly way to support you dry blend vaporizing needs on the go, treat yourself to one today and you will soon see this vape truly offers the most bang for your buck!
1 x Titan 2 Vaporizer
1 x Micro USB Charging Cable
1 x Cleaning Brush
5 x Replacement Screens
3 x Silicone Hygenic Tips
2 x Silicone Cooling Tips
1 x User Manual